Xp-58iiht Driver - Xprinter

Here’s a complete guide to finding, installing, and troubleshooting the XPrinter XP-58IIHT driver.

The XP-58IIHT is a 58mm thermal receipt printer that connects via USB, Serial (RS-232), and Ethernet. It works with Windows, Mac, Linux, Android, and POS systems. xprinter xp-58iiht driver

Part 1: Understanding the Xprinter XP-58IIHT

Before diving into drivers, let’s quickly understand what makes this printer unique. The XP-58IIHT is a direct thermal printer (no ink or toner required) that prints on 58mm wide paper rolls. Unlike older models that only support USB, the "HT" variant often includes an Ethernet port, making it ideal for networked environments. Here’s a complete guide to finding, installing, and

4. The "IIH" vs. "IIHT" Compatibility Dilemma

A common source of technical support tickets involves the confusion between the XP-58IIH and the XP-58IIHT. Part 1: Understanding the Xprinter XP-58IIHT Before diving

Compatibility: In 90% of cases, the XP-58IIH driver works perfectly on the XP-58IIHT hardware.
The Failure Case: The IIHT hardware revision introduced slight changes in the DIP switch settings and baud rate handling. If a user forces the IIH driver on an IIHT unit via Serial/Ethernet, they may experience:
- Cut errors (Partial cuts instead of full cuts).
- Paper feed issues (Feeding 10 lines after print).
- Chinese characters appearing in place of English characters (Encoding mismatch).

Recommendation: Always attempt to source the specific "XP-58IIHT" driver first. If unavailable, the generic "Xprinter XP-58" driver found in Windows Update is a safer fallback than the specific IIH driver.

5. Installation Guide (Windows)

Download: Obtain the driver from the official Xprinter website or the included CD (Driver Version usually v4.0.2 or higher).
Port Selection:
- If USB: Select the port labeled USB001 (Virtual printer port).
- If LAN: Configure a Standard TCP/IP port using the printer's IP address (Default often 192.168.1.87).
Device Settings:
- Paper Size: 58mm x 210mm (Roll).
- Cash Drawer: Ensure the driver is set to "Open Drawer after Print" if a cash drawer is connected to the printer's kick port.

Step 3: Run the Installer

Locate Setup.exe or DriverInstaller.exe inside the extracted folder.
Right-click and select "Run as Administrator."
Accept the license agreement.
Choose "Install printer driver" (not "utility tools" unless you need diagnostics).