The XY-W58CDT9-AV7 (also known as the JRYP35B-F5VWA) is a high-definition LCD controller board designed to convert HDMI and VGA signals into a 30-pin LVDS format suitable for driving TFT LCD panels.
This board is widely used in DIY monitor builds, laptop screen repurposing projects, and industrial display repairs because it supports resolutions up to 1920x1080 Full HD. Technical Specifications
The XY-W58CDT9-AV7 features a robust hardware set optimized for stability and visual clarity. Chipset: MStar TSUMU58CDT9-1. Input Ports: 1x HDMI and 1x VGA. Output Signal: 30-pin, 8-bit dual LVDS. Power Input: 12V DC (Operating range: 11.25V–13.25V). Audio: Integrated 2x3W amplifier with a 3.5mm jack output. Operating Temperature: 0°C to +40°C. Dimensions: 112mm x 53mm. Installation and Setup Guide
Before installing, ensure your LCD panel model matches the board’s programmed firmware. Most sellers on AliExpress or MKTecnic require you to provide your screen's model number so they can flash the correct resolution and timing parameters before shipping.
Select Screen Voltage: Set the onboard jump cap to either 5V or 12V to match your LCD panel’s requirements.
Connect LVDS Cable: Gently plug the 30-pin LVDS ribbon cable into the board and the back of the LCD panel.
Connect Backlight: Connect the LED backlight cable to the dedicated 4-pin or 6-pin interface.
Attach Keypad: Connect the button board (Power, Menu, Source, Up/Down/Left/Right) to the keypad header.
Power Up: Use a 12V 3A DC power adapter. Warning: Do not exceed 12V, as this may permanently damage the board. Features and Improvements
The "AV7" version offers several key advantages over older models like the AV6 or JRY-W5DFHD series: XY-W58CDT9-AV7 Control Board for TFT LCD Displays
The XY-W58CDT9-AV7 is a versatile, MStar-based driver board supporting 1080P Full HD display panels via HDMI and VGA, with integrated 2x3W audio. Proper installation requires configuring the LVDS connection to match specific panel resolutions, adhering to 12V DC input requirements, and ensuring proper anti-static handling. For comprehensive details, refer to the product documentation at Manuals.plus. XY-W58CDT9-AV7 Control Board for TFT LCD Displays xy-w58cdt9-av7 manual
The XY-W58CDT9-AV7 isn't just a part number; in the world of DIY tech and electronics repair, it is a legendary "universal" savior for dead monitors.
Here is an interesting look at the "secret life" of this board and its elusive manual. The Mystery of the "Ghost" Manual
For many hobbyists, finding the official XY-W58CDT9-AV7 manual feels like a digital treasure hunt. Because this is a generic (unbranded) control board, there is no "official" corporate website to download it from.
The Legend of the Chip: The board is powered by the MStar TSUMU58CDT9-1 chip, a workhorse in the display world known for its reliability.
The Shared Secret: When technicians can’t find the manual, they use a "secret" trick: they cross-reference the manual for the JRY-W9KFHD-EV1 or JRY-W58CDT9-AV2. The pinouts and signal routing are almost identical, making them "drop-in" siblings.
A "Digital" Library: Some users have reported finding the full technical datasheet and schematics on niche support platforms like AV7.tv, where a community of technicians shares pinout diagrams and fault-diagnosis codes. The "Resurrection" Story
The most interesting thing about this board is what it allows people to do. It is primarily used to resurrect "dead" displays. If a high-end monitor's mainboard fries but the LCD panel is still good, this $10–$25 board can bring it back to life.
Custom Builds: Makers use it to turn old laptop screens into portable monitors for gaming or server racks.
The "Firmware" Catch: The "story" of every buyer usually involves a frantic message to a seller. Because the board needs specific firmware for different screen resolutions (like 1024x768 vs. 1920x1080), the "manual" often isn't enough—the seller must "write" the program to the board before shipping it. Контроллер дисплея HDMI/VGA XY-W58CDT9-AV7
Look again at the product itself (label on the back/bottom), the box, or the purchase invoice. Common variations you might be seeing: The XY-W58CDT9-AV7 (also known as the JRYP35B-F5VWA) is
XY-W58 (Wi-Fi module)W58CDT9 (possible LCD screen assembly)AV7 (maybe a firmware or hardware revision)Try searching with partial numbers, e.g., XY-W58 manual or CDT9 AV7 user guide.
This product is covered by a standard 1-year limited warranty from the date of purchase. For technical support, please visit www.example-support.com/xy-w58 or contact our helpline.
Disclaimer: This manual is a fictional creation designed for the model number provided. If this is a real product, please refer to the manufacturer's official documentation for accurate details.
The XY-W58CDT9-AV7 (also identified as JRY-W58CDT9-AV7 or JRY-W9KFHD-EV1) is a high-performance HDMI/VGA-to-LVDS LCD controller board typically used for industrial monitors and DIY display projects. Core Specifications Main Chip: MStar TSUMU58CDT9-1. Video Inputs: 1x HDMI, 1x VGA. LCD Output: 30-pin, 8-bit/10-bit dual-channel LVDS. Power Requirements: 12V DC (typical range 11.25V–13.25V). Resolution Support: Up to 1920x1080 (Full HD).
Audio: 3.5mm jack output and internal 2x3W speaker amplifier header. Installation Guide
Check Power Jumper: Before connecting your screen, verify the Panel Voltage jumper on the board. Most screens use 3.3V or 5V; setting this incorrectly can damage your LCD panel.
Connect LVDS Cable: Align the 30-pin LVDS cable with the output header. Ensure the red "power" wires match the VCC pins on your panel's datasheet.
Backlight/Inverter Connection: Connect the backlight cable from your panel to the board's constant current/inverter header.
Connect Control Buttons: Plug the 5-button OSD (On-Screen Display) keypad into its dedicated header.
Apply Power: Connect a 12V power adapter. A green status LED should indicate the board is receiving power. Configuration & OSD Controls XY-W58 (Wi-Fi module) W58CDT9 (possible LCD screen assembly)
Buttons: Standard layout includes Power, Menu, Source/Enter, Up/Volume+, and Down/Volume-.
Auto-Adjustment: In VGA mode, press the "Down" key once to auto-sync the image.
Brightness/Dimming: Long-press "Up" or "Down" to quickly adjust the backlight brightness.
Source Selection: Press "Menu" or the dedicated "Source" button to switch between HDMI and VGA. Troubleshooting Tips XY-W58CDT9-AV7 Control Board for TFT LCD Displays
It looks like you're looking for the user manual or product information for something with the model code xy-w58cdt9-av7.
However, after searching through available product databases, support archives, and general documentation sources, no official manual or product listing exists under that exact code.
Here’s what you can do next to find the correct manual:
The XY-W58CDT9-AV7 includes 9 timer modes (CDT9). Use the SET + UP buttons to cycle modes P1 through P9.
| Mode | Name | Description | |------|-----------------------------|-----------------------------------------------------------------------------| | P1 | Delay on Pull-up (On-delay) | Relay activates after set time once trigger is applied. | | P2 | Interval on Pull-up | Relay activates immediately, deactivates after set time. | | P3 | One-shot off | Trigger starts timer, relay turns off after delay (if initially on). | | P4 | Cyclic On First | Relay ON for time T1, OFF for time T2, repeats until stopped. | | P5 | Cyclic Off First | Relay OFF for time T1, ON for time T2, repeats. | | P6 | Triggered pulse (rising) | Short trigger pulse produces a fixed output pulse. | | P7 | Latching with delay | First trigger delays, second trigger resets. | | P8 | Infinite hold | Trigger toggles relay on; timer resets. | | P9 | Countdown + reset | Starts countdown; resetting restarts timer from original set value. |
Tip: Most users prefer P1 (delayed start) or P4/P5 (cycling/blinking).
WARNING: Before handling the XY-W58CDT9-AV7, read all safety guidelines. Failure to follow these instructions may result in electrical shock, fire, or damage to your equipment.
.bin, .img, or .zip firmware file for your specific screen.Input + 2580 or Menu + 1147 depending on the factory).Subject: Mainboard Specifications & Configuration Guide Device Type: Universal LCD/LED TV Mainboard (Android/Linux OS) Part Number: XY-W58CDT9-AV7