Zastone D9000 Programming Software 2021 Official

Zastone D9000 Programming Software: A Comprehensive Guide

The Zastone D9000 is a popular, high-power (50W/20W) dual-band mobile transceiver known for its detachable faceplate, cross-band repeat function, and analog FM operation. Unlike many modern radios that use standard CHIRP software, the D9000 requires its own proprietary programming tool to manage frequencies, settings, and memory channels.

Step 5: Writing to the Radio

After configuring your channels:

1. Click the "Write Data" (or "Upload to Radio") button.
2. A prompt may appear warning that this will overwrite current data. Click OK/Yes.
3. Do not unplug the cable or turn off the radio until the progress bar reaches 100% and the "Complete" message appears.

Cross-Band Repeat

This turns your mobile radio into a portable repeater. zastone d9000 programming software

• Set Band A: UHF (Receive on 445.500)
• Set Band B: VHF (Transmit on 146.500)
• Software Setting: Check Cross Band Enable and set Delay Time to 500ms.

Chapter 1: Where to Find Safe Software (Avoiding Malware)

The biggest hurdle for D9000 owners is finding the correct version of the software. If you search Google for "Zastone D9000 programming software," you will find a minefield of outdated third-party hosting sites filled with pop-ups and potentially dangerous .exe files.

Safe Sources:

1. The Official CD: Your radio likely shipped with a tiny CD-R. While the software on it is often version 1.0 (old), it is the safest.
2. Radiooddity or BTECH Support: These major resellers often host clean versions. Search their "Firmware/Software" section.
3. Ham Radio Forums (QRZ.com or eHam.net): Experienced users often re-upload clean zips. Check the file hash against known good versions.

What to look for: The file is usually named D9000_V(x.x).exe or Zastone_D9000_CPS.zip. The file size is usually under 5MB. If a site asks you to disable your antivirus, close the tab immediately.

The Official Software: "Zastone D9000 CPS"

The official programming software is often referred to as the Customer Programming Software (CPS) . It is a Windows-based application typically named something like Zastone_D9000_CPS.exe or found within a zip archive labeled "D9000 Software." Click the "Write Data" (or "Upload to Radio") button

Key Functions of the Software:

• Channel Management: Program up to 200 memory channels with frequency (RX/TX), power level (High/Low), bandwidth (Wide/Narrow), and CTCSS/DCS tone settings.
• Scan Lists: Create and edit scan groups for monitoring multiple frequencies.
• Radio Configuration: Adjust system parameters such as backlight timer, time-out timer (TOT), squelch level, and keypad lock behavior.
• Cross-Band Repeat Setup: Configure the D9000’s signature cross-band repeat feature (e.g., receive on UHF and transmit on VHF).
• DTMF & ANI Settings: Program DTMF codes and Automatic Number Identification (ANI) for selective calling.

Chapter 4: Advanced Features of the D9000 Software

The Zastone D9000 programming software isn't just for channels. Look for the "Optional Settings" tab (nomenclature varies by version). Cross-Band Repeat This turns your mobile radio into