10140 Manual Portable !link!: Hager Controls Bp

The Hager Controls BP 10140 is not a standalone product model but rather the postal box (Boîte Postale) address for Hager's headquarters in Saverne, France. When this address appears on a device, it usually indicates the unit is part of Hager’s KNX building automation or time switch ranges, such as the TXA or TYA series. General Operating Guide for Hager Devices

Since "BP 10140" is printed on various modules, identifying your specific device type (analog timer, digital timer, or KNX actuator) is the first step. 1. Analog Time Switches (e.g., EH011, EHN011)

If your device has a large circular dial with small plastic pins (segments):

Set the Current Time: Rotate the outer dial clockwise until the current time aligns with the fixed arrowhead pointer on the inner dial.

Program ON/OFF Times: Each segment typically represents 15 minutes.

Push segments inward (or toward the center) for the periods you want the power ON. Leave segments outward for when you want the power OFF.

Manual Override Switch: Look for a small 3-position switch usually located at the bottom right: Clock Icon: Automatic mode (follows your programmed pins). 1 (or "I"): Permanently ON (Manual Override). 0: Permanently OFF. 2. Digital Time Switches (e.g., EG103, EGN103) hager controls bp 10140 manual portable

If your device has an LCD screen and buttons (Menu, OK, +, -): Access Programming: Press Menu, select Prog, and press OK. Set Schedule:

Select the day or group of days (e.g., 1–7 for the whole week) using + or -.

Choose the state (ON or OFF) and set the specific hour and minute.

Bluetooth Configuration: Newer "EGN" models can be programmed via the Hager Mood app. 3. KNX Actuators (Building Automation)

- manual activation of the outputs on the device possible, building site operation - Status display of the outputs on the device - Ed 10140 - device.report

The Hager BP 10140 is not a standalone product model, but rather refers to a postal box address for Hager Controls S.A.S. in Saverne, France, which frequently appears in technical manuals for digital and analog timers. Based on your search for a "portable" manual, you are likely looking for instructions for the EG103 digital time switch or similar. 1. Programming the EG103 Digital Timer The Hager Controls BP 10140 is not a

If your device features a digital display with a menu, follow these steps to program your schedule:

Set Current Time/Date: Access the configuration menu using the Menu and OK buttons. Enter the current year, month, day, and time. Create a New Program: Select Prog -> New. Choose the days or group of days (e.g., Mon–Fri). Set the ON time and confirm with OK. Set the OFF time for the same group and confirm.

Manual Override: You can manually toggle the output by pressing the front buttons (usually labeled with channel symbols) to override the current program until the next scheduled event. 2. Operating Analog Timers (EHN Series)

If your device has a physical rotating dial with tabs, use this "manual portable" guide:

hager timer connection and setting full information #zkmultitech

Step 3: Oxygen Connection

Connect the oxygen tubing from a wall source or tank to the nipple on the reservoir tail.
Set flow rate: 10–15 Liters Per Minute (LPM) is standard for emergency resuscitation.
Allow the reservoir to fill for a few seconds before application.

Where to Download the BP 10140 Manual Today

To save you time, here are the most likely live sources (as of this writing): Step 3: Oxygen Connection

Direct Hager archive link: Try hager.com/en/support/search-documents and type BP10140.
Manualslib.com: Search “Hager BP 10140”. Users often upload legacy PDFs.
Electrician forums: Groups on Reddit (r/PLC, r/IndustrialMaintenance) or Mike Holt’s forum have members who share obscure manuals.

If all else fails, search for a photo of the BP 10140’s side label – often, the timing and wiring diagram are printed there. Use a magnifying app on your phone.

Intended Use

Providing manual ventilation during cardiopulmonary resuscitation (CPR).
Ventilating patients during anesthesia induction.
Emergency respiratory support during transport.

Part 7: Comparison with Modern Alternatives (For Context)

If you are consulting the BP 10140 manual to decide whether to repair or replace, here is how it stacks up against a modern portable micro-PLC (e.g., Siemens LOGO! or Eaton easyE4).

Verdict: The BP 10140 is robust but outdated. Rely on the portable manual if you are maintaining an existing system. For new builds, choose a modern unit with an onboard interface.

6. Troubleshooting Common Issues