Leo just installed a new Samsung Flip Pro in the office. It’s perfect for brainstorming, but now he needs to print his team's digital sketches directly from the screen. To do this, he needs the Samsung Flip Printing Software installed on a dedicated PC or server to act as the "print bridge." Step 1: Locating the Setup File
Leo starts by heading to the Samsung Business Support page. He searches for his specific Flip model (e.g., WM55R or WM75B) and navigates to the Firmware & Software section. He downloads the specialized tool: Samsung_Flip_Printing_Software_Setup.exe. Step 2: The Server-Side Installation
Leo runs the .exe on a Windows computer that is on the same network as the Flip.
Launch the Installer: He double-clicks the setup file and follows the prompts.
Select the Printer: During installation, the software asks him to select which local or network printer the Flip should use.
Note the IP Address: Once installed, the software displays the IP Address of the PC it’s running on. Leo writes this down—it's the "secret code" the Flip needs to find the printer. Step 3: Configuring the Flip
Leo walks over to the Samsung Flip screen to finish the link: Go to Menu > Settings > Connect. Select Print Server. Enter the IP Address of the PC where he just ran the .exe. Tap Connect. The Result: Instant Hard Copies
With the setup complete, Leo taps the Export button on the Flip and selects Print. The digital canvas is sent to the PC bridge, and seconds later, the office printer hums to life. The team now has physical copies of their digital brainstorm.
Setting Up Your Samsung Flip: A Complete Guide to Printing Software
The Samsung Flip is a powerhouse for collaboration, but its true potential is unlocked when you can seamlessly transition your digital brainstorms onto paper. To do that, you need the right driver—often searched for as "samsung flip printing software setup.exe".
Here is everything you need to know about finding, installing, and configuring the software to get your Flip talking to your printer. 1. Finding the Correct "Setup.exe"
Samsung’s enterprise display business is now largely supported through HP’s service portal (following HP's acquisition of Samsung's printer division) and Samsung’s own B2B support sites.
To find the specific "setup.exe" for your model (WM55H, WM55R, WM65R, etc.): Visit the Samsung Display Solutions website. Navigate to Support > Download Center. Search for your specific Flip model number.
Look for the "Samsung Flip Printing Software" or "Universal Print Driver" under the Software tab. 2. Installation Steps
Once you have downloaded the .exe file to a Windows PC connected to the same network as your Flip, follow these steps:
Run the Installer: Double-click the samsung_flip_printing_software_setup.exe.
Network Permissions: Ensure you grant the software access through your Windows Firewall. The software acts as a "bridge" between the Flip and your local printers.
Identify the Server PC: The computer where you install this software acts as the Print Server. Make note of this PC's IP Address, as you will need it for the Flip interface. 3. Configuring the Samsung Flip Hardware
With the software running on your PC, head over to your Samsung Flip screen:
Tap the top of the screen to bring up the menu and go to Settings. Select Connect and then tap on Printer.
Enter Server IP: Input the IP address of the PC where you installed the software.
Automatic Detection: The Flip should now "see" the printers shared by that PC. Select your preferred printer and tap Save. 4. Troubleshooting Common Issues
If the "setup.exe" isn't working or the Flip can't find your printer, check the following:
Same Network: Both the PC running the software and the Flip must be on the same subnet (VLAN).
Firewall Blocks: Port 8080 or 9100 are commonly used for these connections; ensure they aren't blocked by corporate security settings.
Sleep Mode: If the "Print Server" PC goes to sleep, the Flip will lose its connection to the printer. Set the PC to "Never Sleep" in the Windows Power settings. 5. Why Use the Official Software?
While some users try to bypass the setup using generic drivers, using the dedicated Samsung Flip Printing Software ensures that the aspect ratio of your "rolls" (the Flip's digital pages) is correctly mapped to standard A4 or Letter paper sizes. This prevents your notes from being cut off or distorted during the print process.
By properly installing the setup utility, you turn your Samsung Flip from a standalone whiteboard into a fully integrated piece of your office ecosystem.
Samsung Flip does not typically use a file named "printing software setup.exe" for its core operations, as it is a Tizen-based interactive display. However, if you are looking to enable printing from the Flip to a paper printer, or connect a PC to the Flip to manage print jobs, you generally need the Samsung Flip Printing Software (often bundled as a driver or part of the Samsung Flip Connect utility). samsung flip printing software setup.exe
Here is a comprehensive guide on locating, installing, and configuring the software to bridge your Samsung Flip with your office print network. Understanding the Samsung Flip Printing Ecosystem
The Samsung Flip (WM55H, WM55R, WM65R, WM75R, WM85R) is designed to be a digital replacement for the traditional flipchart. To get your "rolls" or drawings onto physical paper, the Flip must communicate with a printer on the same network. This is achieved via:
Direct IP Printing: Connecting the Flip directly to a network printer.
Server-Based Printing: Using a Windows PC as a "Print Server" where the setup software resides. Step 1: Downloading the Correct Software
While users often search for samsung_flip_printing_software_setup.exe, the official package is usually found on the Samsung Business Support website.
Navigate to the Samsung Display Solutions or the Samsung Enterprise support page. Search for your specific model (e.g., WM65R).
Under the Download section, look for Printing Software or Samsung Flip Connect.
Download the .exe file to a Windows PC that will remain powered on and connected to the same network as the Flip. Step 2: Installation Process
Once you have the .exe file, follow these steps to turn your PC into a print bridge:
Launch the Installer: Double-click the setup file. If Windows SmartScreen appears, select "Run anyway."
Accept Terms: Follow the on-screen prompts to accept the license agreement.
Port Configuration: The software will typically ask to open specific firewall ports (usually Port 9100 or 515). Ensure you allow these so the Flip can "see" the computer.
Complete Setup: Once finished, the software will run in the background (check your system tray for a Samsung icon). Step 3: Connecting the Flip to the Software
Now that the server-side software is ready, you must point the Flip unit to that PC.
On the Samsung Flip, tap the Top Menu (or the arrow at the top of the screen). Go to Import/Export > Print. Select Print Settings.
Enter the IP Address of the PC where you installed the software.
Tap Connect. If successful, you will see a list of printers available on that PC. Step 4: Adding a Printer to the Flip
The Flip doesn't install drivers itself; it "borrows" the drivers from the PC.
Ensure the printer you want to use is already installed and working on the Windows PC.
In the Flip's print menu, select the desired printer from the list.
Test the connection by tapping the Print icon on a current Flip page. Troubleshooting Common Issues
Connection Failed: Ensure both the Flip and the PC are on the same Subnet. If the PC is on Wi-Fi and the Flip is on Ethernet, some routers block "cross-talk."
Software Not Launching: Ensure you have .NET Framework 4.5 or higher installed on the Windows PC.
Firewall Blocks: Corporate firewalls often block the .exe from communicating. You may need to manually whitelist the "Samsung Flip Printing Software" in Windows Defender.
The samsung flip printing software setup.exe is the vital link for physical backups of your digital brainstorming. By installing this on a central PC, you turn your interactive display into a fully integrated office tool.
To set up the Samsung Flip Printing Software, you must install the .exe file on a PC that will act as a print server for the Flip display. 📥 Prerequisites
Hardware: Dual Core 2.5 GHz CPU, 4 GB RAM, and 1 GB HDD space. OS: Windows 7 (SP1) or Windows 10 (32/64-bit).
Settings: Disable Power Saving Mode (Sleep: Never) to prevent server disconnects. Leo just installed a new Samsung Flip Pro in the office
Network: Both the PC and Samsung Flip must be on the same network. ⚙️ Installation Steps
Download: Get the Samsung Flip Printing Software Setup.exe from the Samsung Display Solutions website. Run: Open the file with Administrator privileges. Language: Select your preferred language and click OK.
License: Read the instructions, agree to the terms, and click Next. SSL Port: Enter a port for the connection. Flip 1.0: Only port 443 is supported. Flip 2.0+: Any port can be used.
Finish: Wait for the automatic setup (approx. 5 mins) and click Close. 🖥️ Connecting the Flip to the Server
Once the software is running on your PC, configure the Flip display: On the Samsung Flip, go to Menu (≡) > Settings > Connect. Select Advanced Settings > Print Server.
Enter the IP Address of the PC where the software was installed. Ensure Clock Set is configured correctly in System > Time.
🚀 Key Note: The software only supports physical printers and A4-size paper. Virtual printers (PDF, XPS) and scanners are not supported. If you'd like, let me know: Which Flip model you are using (Flip 1.0, 2.0, or Pro)? Are you getting a specific error code during the setup? Do you need help finding the PC's IP address?
I can provide specific troubleshooting for your network environment. How can I Print from my Flip2? | Samsung Gulf
The Samsung Flip Printing Software (setup.exe) is a specialized utility that transforms a networked PC into a dedicated print server for Samsung Flip interactive whiteboards. This setup is essential because the Flip display itself cannot connect directly to standard office printers; it requires this software intermediary to handle print jobs. Performance and Reliability
The software is highly effective for its intended purpose: enabling users to instantly print brainstorming sessions or meeting notes directly from the Flip screen to paper.
Functionality: It supports standard office printers connected via USB or network and handles clean layouts for annotations and images.
Limitations: It strictly supports A4 paper size only. It also does not support "virtual printers" like Print-to-PDF or fax machines.
System Impact: The software is resource-intensive, requiring at least 50% occupancy rate of CPU and RAM on the host computer to function reliably. Installation and Setup Requirements
The setup.exe file is primarily for Windows environments. Before running the installer, ensure your PC meets the following minimum specifications:
Operating System: Windows 7 (32/64-bit) or Windows 10 (32/64-bit).
Hardware: Dual Core 2.5 GHz CPU (Quad Core recommended), 4 GB RAM, and 1 GB HDD space.
Critical Settings: You must turn off the computer's power-saving mode (specifically "Sleep") to prevent the Flip from losing its connection to the print server. Community Experience
Users generally find the tool necessary for business collaboration, though it requires precise network configuration.
“printing works only by means of a PC. Here the required software (samsung FLip Printing Software) must be installed. PC and Flip must be in both network.” devicebase.net · 5 years ago Setup Checklist
Download: Obtain Samsung Flip Printing Software Setup.exe from the Samsung Display Solutions website.
Install: Run with administrator privileges. During setup, you will be prompted to enter an SSL port (Port 443 is mandatory for Flip 1.0; Flip 2.0 allows any port).
Connect: On the Samsung Flip unit, navigate to Settings > Connect > Advanced Settings > Print Server to link the Flip to your PC's IP address.
Are you setting this up for a standard Flip or the newer Flip Pro model, as port configurations can vary? Samsung Flip Printing Software
Samsung Flip Printing Software Setup.exe is a dedicated utility used to configure a Windows computer as a "Print Server" for the Samsung Flip interactive display. This allows users to export and print their digital notes directly from the Flip hardware to a physical printer connected to that PC. אלקטיס Pre-Installation Requirements
Before running the setup, ensure your environment meets these specifications: Dual Core 2.5 GHz or higher CPU and at least 4GB of RAM. Operating System: Supports Windows 7 (with Service Pack 1) and Windows 10. The Flip display and the PC must be on the same network Power Settings:
You must set your PC's sleep mode to "Never" to prevent the print server from going offline during use. אלקטיס Installation Steps Obtain the installer from the official Samsung Display Solutions website or the main Samsung Support Run Setup: Samsung Flip Printing Software Setup.exe with administrator privileges. Basic Config:
Select your language, agree to the terms, and choose a destination folder. SSL Port Entry: You must use for the SSL connection. You can assign any available port as the SSL port.
The installer will automatically add required components like the .NET Framework; this can take 5–10 minutes depending on your system. אלקטיס Configuring the Flip Display Final Verdict The Samsung Flip Printing Software setup
Once the software is running on your PC (look for the "Agent" icon in your taskbar), you must point the Flip display to it: Navigate to Advanced Settings Print Server on the Flip display. IP address of the PC where you installed the software. Ensure the "Clock Set" is also configured under for proper synchronization. samsung.com Important Limitations The software currently only supports A4 paper size Physical Printers Only:
The Samsung Flip Printing Software (specifically the Samsung Flip Printing Software Setup.exe file) is designed to transform a standard computer into a dedicated print server. This allows users to send digital notes and sketches directly from the Samsung Flip interactive display to a physical printer connected to that PC. 1. System Requirements & Preparation
Before running the installer, ensure your PC meets the following hardware and software specifications to prevent connection drops:
Operating System: Windows 7 (SP1) or Windows 10 (32/64-bit).
Processor: Dual Core 2.5 GHz or higher (Quad Core recommended). Memory: At least 4 GB RAM.
Network: The Samsung Flip and the PC must be on the same network.
Power Settings: Disable Power-saving mode on the PC. Set "Put the computer to sleep" to Never in the Windows Control Panel to ensure the server remains reachable. 2. Installation Steps
Follow these steps to set up the software on your Windows PC:
Download the Installer: Obtain the Samsung Flip Printing Software Setup.exe from official sites like Samsung Display Solutions or Samsung.com.
Run the Setup: Launch the .exe file. Select your language and click Next.
Configure Destination: Agree to the terms and choose an installation folder (or use the default).
Security Permissions: Enter your computer login password when prompted to grant the necessary installation rights.
SSL Port Configuration: Enter an SSL port for the connection. Flip 1.0: You must use Port 443. Flip 2.0: You can assign any available SSL port.
Complete Installation: The process typically takes about 5 minutes. Click Close once finished. 3. Connecting the Samsung Flip to the Server
Once the software is running on your PC, you must link the Flip display to it:
Navigate to Settings: On the Samsung Flip, go to Menu (≡) > Settings > Connect > Advanced Settings > Print Server.
Enter IP Address: If the connection isn't automatic, manually enter the IP address of the PC acting as the print server.
Set the Clock: Ensure the Clock Set (Menu > Settings > System > Time) is correctly configured, as mismatched times can cause connection errors. Key Limitations Format: Only A4 paper size is supported.
Printer Type: The software supports only physical printers that print on actual paper. Virtual printers (like PDF, XPS, or OneNote exporters) and fax machines are not supported. Troubleshooting Common Issues
Blocked Ports: If the Flip cannot find the server, check your Windows Firewall or antivirus settings to ensure the assigned SSL port is not being blocked.
Static IP: It is highly recommended to use a static IP for the print server PC. If the PC uses a dynamic IP (DHCP), the Flip may lose the connection every time the IP changes.
CPU Usage: The server software requires at least 50% occupancy rate of CPU and RAM for stable performance; close unnecessary background apps if printing is sluggish. Samsung Flip Printing Software
The Samsung Flip Printing Software setup.exe is essential for direct printing from your Flip device to a Windows-connected printer. While installation is straightforward, network configuration and firewall settings are the most common hurdles. Once running, it saves significant time compared to manual export methods.
If you continue experiencing issues, consider switching to PDF export or contacting Samsung Business Support with your Flip model number and Windows version.
Need the direct download link? Visit Samsung’s official business support portal and search for your specific Flip model under “Software & Drivers.”
Warning: Do not download setup.exe files from third-party “driver download” websites. These often contain malware. Always use Samsung’s official business portal.
Because this software opens a network port to receive print jobs, security is paramount.
setup.exe, update the Flip’s firmware to the latest version (check Samsung’s support site for version 4.0.0 or higher). Older firmware has known SMBv1 vulnerabilities.With samsung flip printing software setup.exe installed, here is how end-users leverage it:
Solution:
Win + R, type services.msc.