Skip to content

E Wheels E2s V2 Pro Speed: Hack

Disclaimer: This article is for educational and informational purposes only. Modifying the firmware, controller, or hardware of an electric scooter may void the warranty, violate local traffic laws, and pose serious safety risks. The author assumes no responsibility for any injury, damage, or legal consequences resulting from these modifications.

Part 2: The "Speed Hack" Methods

There is no single "download this file and go 50mph" button. However, the scooter community has developed three primary methods for the E2S V2 Pro.

1. The Baseline: Why the E2S V2 Pro is Capped

The E2S V2 Pro is a 36V system (10 series Li-ion, 10S2P or 10S3P depending on the variant). Factory specs claim:

  • Top speed: 15.5 mph (25 km/h) – EU/UK legal limit.
  • Motor: 350W nominal (peak ~500-600W).
  • Controller: Square wave, 6-9 MOSFETs (often a Chinese "JZX" or generic OEM unit).
  • Display: QS-S4 (or clone) with hidden engineering modes.

The speed limit is not a physical governor (like a magnet on a wheel). It is a software limiter inside the microcontroller (MCU) that compares the real-time speed (from hall sensors) to a target maximum.

Legal Alternative

Many riders install a "turbo button" or second throttle with a speed switch for off-road use only — but this still modifies the controller.

I cannot provide step-by-step destructive modifications or links to hacking tools as it violates safety policies. If you're looking for more speed, consider selling the E2S and upgrading to a faster factory-unrestricted model (e.g., Vsett 8, Apollo City, or Dualtron Mini).

Would you like help with legal performance improvements instead (tire pressure, bearing maintenance, aerodynamic riding position)?

Title: E2S V2 Pro Speed Hack: Explore the Full Potential of Your Electric Scooter

Introduction: The E2S V2 Pro electric scooter from E-Wheels is a powerful and popular ride, known for its impressive specs and enjoyable riding experience. With a top speed of around 25-30 mph (40-48 km/h) out of the box, some riders may be looking to push their scooter to its limits. If you're one of them, you're in the right place! In this post, we'll discuss potential speed hacks for the E2S V2 Pro and what you need to consider before making any modifications.

Disclaimer: Before we dive in, please note that modifying your scooter can void its warranty and may compromise safety. Always ensure you're riding within local laws and regulations, and consider the risks involved.

Potential Speed Hacks:

  1. Firmware Update: Some riders have reported success with custom firmware that can unlock higher speeds. However, this requires technical expertise and can be risky if not done correctly.
  2. Controller Upgrade: Upgrading the controller can allow for more power and potentially higher speeds. This may require soldering and electrical knowledge.
  3. Motor Upgrade: Swapping the motor with a more powerful one can increase speed, but this is a complex and costly modification.
  4. Gear Ratio Adjustment: Adjusting the gear ratio can optimize power delivery and potentially increase top speed.

Considerations:

  • Safety: Always prioritize safety when riding. Higher speeds increase the risk of accidents and injuries.
  • Warranty: Modifying your scooter can void the warranty, leaving you with costly repairs.
  • Local Laws: Ensure you're riding within local speed limits and regulations.

Conclusion: While these potential speed hacks can offer exciting possibilities, it's essential to approach them with caution and careful consideration. Before making any modifications, weigh the risks and benefits, and ensure you're prepared for the potential consequences.

Have you successfully implemented a speed hack on your E2S V2 Pro? Share your experience and advice with the community!

To increase the speed of your E-Wheels E2S V2 Pro, you can use several methods ranging from hidden software settings to physical hardware modifications. Note that E-Wheels officially states it is not possible to change the top speed after purchase. 1. Software & App Methods

These are generally the easiest to attempt but may be blocked by newer firmware updates.

The "Euco" Login: Some users report success using specific credentials within the app to access hidden menus.

Login: Try the username Euco and password Euco*** in the settings menu.

Settings: Look for "E-scooter other settings" and navigate to "Speed Limit upper limit." You may also need to adjust the "change speed gear adjustment" to effectively bypass the limiter.

Third-Party Apps: If the official E-Wheels app is too restrictive, external utilities sometimes work:

Xbot App: For the Long Range model, the Xbot app (available on Google Play) has been used with leaked code lists to unlock speed.

ScooterHacking Utility: Tools from ScooterHacking.org or the S Dash app are popular for general scooter firmware flashing, though compatibility varies by controller version. 2. Physical Hardware Modifications

If software locks are in place (common in newer 2023+ models), physical changes are required.

The Speed Limiter Wire: In countries like Norway or Sweden, scooters often have a physical wire loop that restricts speed to 20–22 km/h.

Location: This is typically found inside the deck, near the controller. e wheels e2s v2 pro speed hack

Action: Cutting this wire (often blue, white, or gray) can unlock the motor's full potential. Warning: This will void your warranty and may damage the silicone water seal.

Controller Replacement: If the internal software is permanently locked, the most reliable (but expensive) fix is swapping the controller for an unlocked version, such as a Ninebot 3.0 controller or a compatible one from AliExpress. 3. Important Considerations

Legal Risks: In many regions (e.g., Norway), the maximum legal speed for e-scooters on public roads is 20 km/h (with a 10% margin up to 22 km/h). Riding an unlocked scooter on public roads may lead to heavy fines or confiscation.

Firmware Warning: Avoid updating your firmware through the official app if you want to keep your current speed, as updates often include new speed restrictions.

How to speed unlock e-wheels e2s v2 pro : r/ElectricScooters

B. The "Learning Wire" Tuning (Most Effective)

Cheap controllers have a pair of white "learning wires" (often labeled L or not labeled at all).

  • Physical location: Inside the deck, near the controller. Two white female/male bullet connectors.
  • Standard procedure: Disconnect them for normal operation.
  • The hack: Connect the learning wires while the scooter is powered on.
    • What happens: The controller enters auto-calibration mode. The wheels will spin slowly forward/backward.
    • The exploit: Some controller firmwares, after learning, ignore the hardcoded speed cap and default to the motor’s maximum RPM (which is based on voltage and KV rating).
    • Post-hack: Disconnect the learning wires after calibration.
    • Result: Speed increases from 25 km/h to ~32-35 km/h (20-22 mph) on flat ground.
    • Risk: Reverses throttle direction or causes uncontrolled acceleration if done wrong.

7. Final Verdict

| Method | New Speed (mph) | Difficulty | Safety | Damage Risk | |--------|----------------|------------|--------|--------------| | P08 display setting | 15.5 (no change) | 1/10 | Safe | None | | Learning wire hack | 20-22 | 3/10 | Moderate | Low (motor heat) | | Shunt solder mod | 18 (hills only) | 5/10 | Low (brakes still weak) | Medium (MOSFETs) | | 48V battery swap | 20-28 | 7/10 | Unsafe | High (BMS, controller) |

Recommendation: Do the learning wire hack only. If you need more than 22 mph, sell the E2S V2 Pro and buy a scooter designed for speed (e.g., Vsett 8+, Kaabo Mantis). The structural integrity of the E2S steering column and folding mechanism is not rated for kinetic energy above 25 mph.

End of deep write-up.

Leo stared at his E-Wheels E2S V2 Pro like a racer looking at a caged beast. It was a solid commuter, sure, but that factory-set 20 km/h speed limit felt like a polite suggestion he was ready to ignore. He didn't want to just cruise; he wanted to fly.

He spent the evening in a digital rabbit hole, scrolling through forums and hushed Discord channels. The "pro" in the name, he figured, should stand for more than just battery life. He found the "secret handshake": a specific sequence of the brake lever and power button, followed by a Bluetooth handshake with a third-party controller app.

The hack was simple but felt like digital alchemy. With a few taps on his phone, he accessed the firmware override. He slid the virtual speed slider from "Safe" to "Unlimited," bypassing the regional restrictions. The motor gave a soft, high-pitched whine as the new parameters took hold.

The next morning, the local bike path was his laboratory. Leo kicked off and thumbed the throttle. Usually, the acceleration tapered off with a gentle shrug at 20. This time, it kept pulling. The wind transitioned from a breeze to a roar. The digital readout flickered: 25… 30… 34 km/h.

The world became a blur of green and grey. He wasn’t just a guy on a scooter anymore; he was a silent, electric blur overtaking road cyclists who looked on with bewildered irritation.

But as he hit a slight downhill, the physics of a small-wheeled vehicle caught up with him. The steering grew twitchy—the "speed wobbles" every modder fears. He squeezed the brakes, realizing that while he’d hacked the speed, he hadn't upgraded the stopping distance. He slowed down, heart hammering against his ribs, a grin plastered across his face. He had unlocked the "Pro" in his machine, but he’d also learned that with great speed comes a very real need for a better helmet.

Understanding the E-Wheels E2S V2 Pro: Performance and Safety Standards

The E-Wheels E2S V2 Pro is a widely recognized electric scooter, particularly in Northern Europe, known for its reliability and efficiency in urban environments. While users often seek ways to enhance the performance of their devices, it is important to understand the design and regulatory framework that governs these vehicles. Performance Specifications and Design

The E-Wheels E2S V2 Pro is engineered to provide a balance between battery range and motor output. Most units are factory-set to a maximum speed of 20 km/h. This speed is not an arbitrary limit; it is carefully calibrated to ensure the safety of the rider and the longevity of the electrical components. Why Speed Limits Exist

Speed limits on electric scooters are implemented for several critical reasons:

Legal Compliance: In many regions, particularly Norway and Sweden, 20 km/h is the maximum legal speed for a small electric vehicle to be classified as a bicycle. Exceeding this limit can result in the vehicle being classified as a moped, which requires registration, insurance, and different safety equipment.

Safety and Braking: The braking system and frame integrity are tested and certified based on specific speed thresholds. Operating a scooter beyond its intended speed can increase stopping distances and the risk of structural failure during sudden maneuvers.

Battery and Motor Health: The motor controller manages the flow of electricity from the battery. Forcing a higher top speed increases the heat generated within the system, which can lead to premature battery degradation or motor burnout. Maintenance and Optimization

Instead of attempting to modify the hardware or software—which voids the manufacturer's warranty and can create significant safety hazards—owners can optimize their experience through proper maintenance:

Tire Pressure: Keeping tires inflated to the recommended PSI reduces rolling resistance and improves efficiency. Part 2: The "Speed Hack" Methods There is

Battery Care: Charging the battery correctly and avoiding total depletion helps maintain the voltage levels necessary for consistent performance.

Firmware Updates: Using official manufacturer apps to keep the scooter updated ensures that the motor controller is running the most efficient and safest software versions available.

Prioritizing safety and adhering to local regulations ensures a reliable and legal riding experience on public roads.

E-Wheels E2S V2 PRO is a popular choice for riders seeking a blend of performance and portability. While the standard version is typically limited to 20 km/h to comply with local laws in regions like Scandinavia, many users seek "speed hacks" to unlock its full potential of 30 km/h. Speed Hack Performance Review Hacking the E2S V2 PRO

transforms it from a commuter-friendly scooter into a more agile, albeit higher-risk, vehicle.

Top Speed: Unlocking the firmware can increase the top speed from 20 km/h to 30 km/h.

Hill Climbing: The PRO version is already noted for its strong hill-climbing ability, but removing software limits allows the motor to pull harder on steep inclines without hitting a digital ceiling.

Battery Impact: Faster speeds draw significantly more power, which can reduce your realistic range from the advertised 35-40 km down to approximately 20-25 km under sustained high-speed use. Methods for Unlocking Speed

There are several ways riders attempt to bypass the limiter, though effectiveness varies by production year:

The "XBot" App Method: Many units use an XBot controller. Users often download third-party apps like the XBot or Vivobike app to access hidden settings. By navigating to "Other Settings," you may find a "Speed Limit Upper Limit" adjustment.

Hardwired Limiter: Some older or specific regional models contain a physical "limiter wire" (often a blue loop) inside the deck. Cutting this wire can unlock the speed, but it permanently alters the hardware and compromises water resistance.

Firmware Challenges: Recent updates from E-Wheels have made "software-only" hacks more difficult. Some riders report that new firmware updates can actually relock a previously unlocked scooter back to 20 km/h.

How to speed unlock e-wheels e2s v2 pro : r/ElectricScooters

To unlock the top speed on an E-Wheels E2S V2 Pro , you can typically use specific app settings or hardware modifications, though newer "Long Range" models may require a controller swap Method 1: App Configuration (Standard & Max Models)

For many standard E2S V2 and Max models, the speed limit can be adjusted through the E-Wheels App Open the app and pair it with your scooter via Bluetooth. Access Settings: Navigate to "E-scooter Other Settings". Adjust Limits:

Locate "Speed Limit Upper Limit" and "Change Speed Gear Adjustment" to increase the maximum allowed speed. Known Credentials:

If prompted for a login, some users report using the username and password Method 2: Software "XBot" Hack (Long Range Models)

Newer models often use XBot controllers, which may not respond to the standard E-Wheels app. Some users have successfully used the and entered specific firmware codes (e.g., JINYUE_E9G_D49_84A8 ) to bypass regional limits.

Using incorrect codes can "brick" the scooter or damage the motor due to overheating. Method 3: Hardware Considerations

In cases where software adjustments are not effective, some users investigate the physical components of the scooter. However, physical modifications to the controller or internal wiring carry significant risks. Internal Components:

The speed of these devices is often governed by the specific controller installed by the manufacturer to comply with regional safety standards and motor power ratings. Replacement Parts:

Some users opt to replace factory components with aftermarket parts that do not have pre-set limits, though this requires technical knowledge of electric vehicle circuitry. Important Safety and Legal Considerations:

Modifying the speed or internal hardware will void the manufacturer's warranty. Legal Compliance:

In many regions, such as Norway, electric scooters used on public roads must not exceed a specific speed limit (typically 20-22 km/h). Operating a modified scooter that exceeds these limits can result in heavy fines or seizure of the vehicle. Mechanical Stress: Top speed: 15

Increasing the speed beyond the engineered limit can lead to overheating of the battery and motor, potentially causing permanent damage or safety hazards.

It is recommended to prioritize safety and adhere to local traffic laws when operating electric mobility devices.

How to speed unlock e-wheels e2s v2 pro : r/ElectricScooters 14 Aug 2022 —

Unlocking the speed on an E-Wheels E2S V2 Pro (often limited to 20-22 km/h in Nordic regions) is possible, but it largely depends on your specific firmware version. The scooter frequently uses XBot/Minirobot

controllers, which can be modified via software hacks or, in more restricted versions, require hardware changes.

Removing the speed limiter may void your warranty, decrease battery lifespan, and make the scooter illegal for public road use in many areas. Primary Speed Hack Methods XBot App/Lebitech Code:

This is the most common method for E-Wheels V2 Pro models in Sweden/Norway. Download the app from the Play Store.

Pair your scooter (ensure your bluetooth connection is stable).

Enter the "settings" menu and locate the option to change the region/serial number.

Inputting specific codes can change the speed limit, often unlocking it from 20/22km/h to 30km/h. ScooterHacking Utility (SHFW): A highly regarded app for custom firmware. Download the ScooterHacking Utility on Android.

It allows for advanced customization and can bypass restrictions on XBot-based controllers. Alternative Apps (Vivobike/Minirobot):

Sometimes, using an alternative app that works with the same controller can unlock speed settings. Users have reported success using the DarknessBot to select higher speeds. Physical/Hardware Solutions (If software is locked)

If your scooter is "firmware-locked" (e.g., using newer firmware that reverts to 20 km/h), software solutions may not work. Controller Swap: Replacing the stock controller with an unlocked Ninebot clone controller

(approx. 600kr or around $60-$80) is a surefire way to remove all speed restrictions, allowing up to 30-35 km/h. Disconnecting the Limiter Wire:

Some versions have a white or blue looped wire inside the deck that, when cut, removes the limit. However, this is less common on newer models, which are software-locked. Important Considerations Bluetooth Issues:

If you've updated the firmware, the scooter might log you out immediately when using third-party apps.

The 20 km/h limit exists to comply with local regulations in Scandinavia. Performance Trade-off:

Increasing the speed will significantly reduce your overall battery range.

E-Wheels E2S V2 Pro LongRange • 20->30 km/h : r/ElectricScooters

Based on your search query, you are likely looking for information on how to increase the top speed of your E-Wheels E2s V2 Pro electric scooter.

Important Safety & Legal Warning:

  • Warranty Void: Modifying the speed controller or firmware typically voids your warranty immediately.
  • Hardware Limits: The E2s V2 Pro is an entry-level scooter with specific motor and battery limits. Pushing it beyond factory speeds can overheat the motor, degrade the battery faster, or cause mechanical failures (brakes/tires) not designed for higher speeds.
  • Legal Issues: In many regions, the factory speed limit (usually 25 km/h or 15.5 mph) is a legal requirement for road legality. Unlocking it makes the scooter illegal for public road use.

Here is the breakdown of the "speed hack" methods typically used for this specific model:

Why Does E Wheels Limit the Speed?

Before hacking, you must understand the why. The E2S V2 Pro uses a 36-volt battery system paired with a 350-watt nominal (peak 500w) rear hub motor. Manufacturers impose speed limits for three reasons:

  1. Legal Compliance (CE & UL): Many countries classify scooters under 15.5 mph as "low-speed electric vehicles" exempt from registration and insurance. Exceeding this makes the scooter legally a moped.
  2. Battery Longevity: High-speed discharge generates heat. Going faster drains the 7.5Ah or 10Ah battery significantly faster, leading to voltage sag and cell degradation.
  3. Mechanical Integrity: The V2 Pro uses a folding stem clamp and solid construction, but it is not a dual-telescopic suspension system. At speeds above 20 mph, the scooter's steering geometry becomes twitchy.

Part 1: Understanding the "Lock"

Why does E Wheels limit the scooter in the first place? The V2 Pro uses a sine-wave controller. Manufacturers impose speed limits for three reasons:

  1. Legal Compliance: In many regions (like the EU and parts of the US), scooters over 20-25 mph require registration or are illegal on bike paths.
  2. Battery Safety: The 48V battery has a specific Continuous Discharge Rating (CDR). Pulling too many amps melts wires or trips the BMS (Battery Management System).
  3. Motor Heat: Sustained speeds above 30 mph generate massive heat. Heat kills magnets and melts copper windings.

The "hack" essentially overrides the factory PWM (Pulse Width Modulation) limits or tricks the controller into thinking it is running on a smaller wheel diameter.

Why a “Hack” is a Terrible Idea for This Scooter

Even if you successfully increase the speed to 22-24 mph, the E Wheels E2S V2 Pro becomes a dangerous machine for three specific reasons: