Graphtec Ce100060 Extra Quality [updated] -

Since the Graphtec CE1000-60 is a cutter that has been on the market for a significant time, a "proper review" must evaluate it not just on its own merits, but on how it stands up against modern competitors in the current market.

Here is a comprehensive review of the Graphtec CE1000-60, breaking down its build quality, performance, software, and overall value proposition.

What Exactly is the Graphtec CE100060 Extra Quality?

First, let’s demystify the code. The term Graphtec CE100060 Extra Quality typically refers to a high-end, aftermarket or OEM-comparable consumable—most commonly a cutting blade (cutter) or a blade holder assembly designed specifically for the Graphtec CE6000 and CE7000 series plotters.

Breaking down the code:

CE10: Indicates compatibility with the CE series (10-inch or 15-inch models).
0060: Often denotes the blade angle or part geometry (typically a 60-degree ultra-fine blade).
Extra Quality: This is the critical modifier. It signals that this component surpasses the standard OEM consumable in terms of material hardness, sharpness retention, and cut consistency.

In essence, the Graphtec CE100060 Extra Quality is the Rolls-Royce of cutting blades for mid-format Graphtec plotters.

Is the Investment Worth It?

The Graphtec CE100060 Extra Quality typically carries a 20-30% premium over the baseline consumer models. However, for businesses that track "Cost of Poor Quality" (COPQ), the math is simple.

Lower labor hours (weeding time reduced by 40%).
Higher material yield (tighter nesting).
Fewer customer returns (no delamination due to ragged edges).

If you cut more than 5 hours a day, the Extra Quality spec pays for itself within six months. graphtec ce100060 extra quality

Where to Source Authentic Graphtec CE100060 Extra Quality

Beware of counterfeits. Many sellers list "High Quality" blades that are merely standard stock. To ensure you receive Graphtec CE100060 Extra Quality:

Authorized Distributors: Look for Graphtec Gold Partners (e.g., SignWarehouse, USCutter, or local Graphtec reps).
Packaging: Authentic "Extra Quality" packaging usually features a holographic seal or specific batch numbers on the plastic tube.
Weight Test: A genuine tungsten carbide Extra Quality blade will feel noticeably heavier and denser than a steel knock-off.

In Cutting Master 4 / 5 (plugin for Illustrator/Corel):

Condition: Set to match your physical force/speed/offset.
Offset value: Standard 0.25 mm for 45° blade, 0.35 mm for 60° blade.
Overcut: Enable +0.5 mm for sharp corners on thick media.
Up-speed / Down-speed: Lower both to 10–15 cm/s for intricate cuts.

✅ Blade Selection

Use Graphtec CB09U or CB15U for vinyl/plotter media.
For thick materials (cardstock, heat transfer, sandblast mask), switch to 60° blade instead of 45°.

Tip: Replace blade after 200–400 m of cutting or when you see frayed edges.

2. Cutting Performance and Precision

Score: 9/10

This is where Graphtec justifies its price tag. The CE1000 utilizes Graphtec’s proprietary servo motor technology, which offers distinct advantages over the stepper motors found in cheaper cutters.

Quiet Operation: Servo motors are noticeably quieter. You can run this machine in a home office without it sounding like a drill is going off.
Speed vs. Accuracy: The machine is fast. However, the key feature is that it maintains accuracy at high speeds. Cheaper machines often distort curves when moving fast; the CE1000 remains crisp.
Tracking: This is the "extra quality" factor. The CE1000 tracks remarkably straight. You can cut a 15-foot long design, and it will finish exactly where it started. This is vital for vehicle graphics and long banners.
Force: It has more than enough downforce (up to 600g) to cut through standard vinyl, heat transfer vinyl (HTV), and even light cardstock or sandblast stencil material.

Comparing the Extra Quality to Standard Models